High Performance Encryption Performance Benchmarks

Aviatrix High Performance Encryption is available on AWS, Azure, GCP, and OCI.

AWS Performance Test Results

Aviatrix ActiveMesh HPE achieves line rate performance with encryption in AWS when Jumbo Frames are deployed (the default setting for AWS instances). The test benchmark baseline is the native AWS peering where no Aviatrix Gateways are deployed in the VPCs. Adding 500 stateful firewall rules have little impact to the performance.

The test topologies are shown below.

test_topologies

The test is conducted by using iperf3 tool with TCP 128 streams. The two VPCs are in the same region.

MTU = 9000 Bytes (AWS default setting)

jumbo

MTU = 1500 Bytes

1500

Single Gateway in AWS Performance Test Results

This test is done without HA enabled in either Spoke or Transit Gateways. The traffic is end-to-end from user instance > Spoke Gateway > Multi-Cloud Transit Gateway > Spoke Gateway> Instance.

For MTU = 9000 Bytes, the result is shown in the diagram below.

single_gateway_jumbo

For MTU = 350 Bytes, the result is shown in the diagram below.

single_gateway_350B

T3 Instance Series Performance

Spoke Gateway Throughput Gbps (MTU 1500B) Throughput Gbps (MTU 9600B)

t3a.xlarge

6.12

9.82

t3a.medium

2.33

8.85

t3a.small

2.7

8.52

t3.large

3.34

9.5

t3.medium

3.03

9.6

t3.small

3.35

9.96

Azure Performance Test Results

The performance results below are from tests conducted with the topology of Test VMs > Spoke > Transit > Spoke > Test VMs in the same region with active-mesh deployment.

Test VMs' route tables are load balanced to point to either primary Spoke Gateways or HA Spoke Gateways to take advantage of the active-mesh deployment.

The test topology is shown below.

azure_test_topology
Transit Gateway Throughput with MTU 1500B

Standard_F48s_v2

24.52Gbps

Standard_F32s_v2

21.56Gbps

Standard_D32_v3

20.47Gbps

Standard_D5_v2

20.56Gbps

GCP Performance Test Results

The test topology is shown below with the following conditions:

  • VM <→ Spoke <→ Transit <→ Spoke <→ VM

  • HA enabled

  • HPE mode enabled

gcp_test_topology

N1 Series Performance

Transit Gateway Throughput Gbps (MTU 1500B)

n1-highcpu-4

3.12

n1-highcpu-8

6.54

n1-highcpu-16

11.58

n1-highcpu-32

19.97

N2 Series Performance

Transit Gateway Throughput Gbps (MTU 1500B)

n2-highcpu-4

5.063

n2-highcpu-8

10.2

n2-highcpu-16

14.98

n2-highcpu-32

25.549

C2 Series Performance

Transit Gateway Throughput Gbps (MTU 1500B)

c2-standard-4

5.792

c2-standard-8

9.44

c2-standard-16

18.48

c2-standard-30

25.52

c2-standard-60

32

To deploy Aviatrix Gateways with N2 or C2 series successfully, you need to apply CPU Quota Increase request to GCP support first.

OCI Performance Test Results

The performance results below are from tests conducted with the topology of Test VMs > Spoke > Transit > Spoke > Test VMs in the same region with active-mesh deployment.

Test VMs' route tables are load balanced to point to either primary Spoke Gateways or HA Spoke Gateways to take advantage of the active-mesh deployment.

Transit Gateway Throughput with MTU 1500B

VM.Standard2.2

0.5092Gbps

VM.Standard2.4

1.057Gbps

VM.Standard2.8

2.471Gbps

VM.Standard2.16

4.99Gbps

VM.Standard2.24

6.039Gbps

Transit Gateway Throughput with MTU 9000

VM.Standard2.2

2.584Gbps

VM.Standard2.4

4.878Gbps

VM.Standard2.8

10.75Gbps

VM.Standard2.16

20.1199bps

VM.Standard2.24

24.65Gbps

How to Tune Performance

Check MTU size

To check MTU size, use Trace Path.

  1. In Aviatrix Controller, go to Troubleshoot > Diagnostics > Network.

  2. In Gateway Utility, select a gateway and specify a destination host name or IP address.

  3. Click Trace Path. The MTU of the devices along the path is shown.

Tune TCP window size

For Linux machine, follow the instructions here to tune TCP window size.