CloudN for Site2Cloud
CloudN can be deployed on-prem as a virtual router. This guide helps you to configure Site2Cloud IPsec tunnels on CloudN that connect to an Aviatrix Gateway in an AWS VPC, Azure VNet, or Google Cloud VPC. (CloudN can also connect to any third-party router or firewall for IPsec tunnel).
![image8](../deploying-secure-networks/_images/cloudn-site2cloud.png)
Configuration Workflow
Before you start, make sure you have the latest software by checking the Dashboard. If an alert message is displayed, click Upgrade to download the latest software.
The Site2Cloud on CloudN configuration workflow is very simple.
-
If the remote cloud gateway is an Aviatrix gateway, you should already have a configuration text file for this connection. If you need help getting file, see Aviatrix Gateway to Aviatrix Gateway.
-
Click Site2Cloud on the left navigation panel, and then click +Add New.
-
Click Import (located at the right corner of the page).
-
Click OK. You are done.
-
Refresh the screen, the tunnel should be up.
-
Add a static route on the default gateway where CloudN is deployed to point to CloudN as the next hop to reach the remote site.
-
If the remote side is NOT an Aviatrix gateway:
-
-
Click Site2Cloud > +Add New.
-
Enter a Connection Name. For example: store1-to-cloud.
-
At Remote Gateway IP Address, fill in the public IP address of the remote gateway. For example, 54.12.1.4
-
Enter the Pre-shared Key.
-
Enter Remote Subnet CIDR blocks. For example, 10.2.2.0/24
-
Enter Local Subnet CIDR blocks. For example, 192.168.1.0/24
-
Click OK.
-
Add a static route on the default gateway where CloudN is deployed to point to CloudN as the next hop to reach the remote site.