Configuring VM-Series ethernet1/1 with WAN Zone

After logging in, select the Network tab to see a list of ethernet interfaces. Click ethernet1/1 and configure as per the following screenshot.

  1. Select the Network tab.

  2. Click ethernet1/1.

  3. Select layer3 for Interface Type

  4. Click Config tab in the popup Ethernet Interface window.

  5. Select default for Virtual Router at Config tab.

  6. Click New Zone for Security Zone to create a WAN zone.

  7. At the next popup window, name the new zone "WAN" and click OK.

    new_zone
  8. Select IPV4 tab in the popup Ethernet Interface window.

  9. Select DHCP Client.

  10. Unmark the Automatically create default route pointing to default gateway provided by server checkbox as shown below.

    ipv4
  1. Click Commit. Once Commit is complete, you should see the Link State turn green at the Network page for ethernet1/1.