Transit Gateway to Cisco ASA over the Internet Workflow

  1. In CoPilot, navigate to Cloud Fabric > Gateways > Transit Gateways.

  2. Create a Transit gateway that will connect to the Cisco ASA.

  3. To connect the Transit VPC gateway to the Cisco ASA, navigate to Networking > Connectivity > External Connections (S2C) and follow these instructions.

  4. Download the configuration.

  5. Ensure that your Cisco ASA is configured based on the information in the downloaded file. The following is a sample configuration based on the external connection configuration above.

    image5
    The tunnel IP addresses are configured accordingly with the configuration file downloaded above.

  6. After configuring the Cisco ASA, in CoPilot navigate to Diagnostics > Cloud Routes > External Connections to confirm that the tunnel status has changed from Down to Up.

  7. Navigate to Diagnostics > Cloud Routes > BGP Info tab to verify the BGP routes. The Status should be Established. If some external connections for the selected Transit Gateway are Not Established, the overall BGP Status for the Transit Gateway is Partially Established.