Aviatrix CoPilot Software Release Notes

AVX-56508

Fixed an issue where the CoPilot gateway packet capture might parse the output incorrectly and show incomplete or inaccurate information.

AVX-55004

The CoPilot UI does not properly create a high availability (HA) instance for a public subnet filtering (PSF) gateway.

To create a PSF-HA specialty gateway, use the Controller UI and go to SECURITY > Public Subnet.

AVX-56178

On Topology > Replay, clicking the Audit button takes you to a blank page. To access the Audit feature, go to Administration > Audit.

AVX-56928

On Security > Distributed Cloud Firewall > Settings, the Enforcement on PSF Gateways and Enforcement on External Connections cards might show incorrect status the first time you open CoPilot.

AVX-54065

Corrected an issue on Cloud Fabric > Gateways that resulted in the UI not displaying the Manage Gateway Attachments option after the first attachment was created.

AVX-55064

Resolved an issue on Cloud Resources > Cloud Account that prevented connection to Azure China accounts.

AVX-55251

Resolved an issue in Administration > Reports that led to FlightCheck Reports displaying misleading values for transit traffic metrics.

AVX-55253

Corrected an issue on Diagnostics > Cloud Routes that caused the UI to show an inaccurate count of tunnels. Now, if tunnel data is not available, Tunnel Status and Tunnel Count will be blank.

AVX-55447

Corrected an issue in Cloud Fabric > Gateways > Spoke Gateways that prevented tooltips from displaying gateway names. Now, if a name is too long to fully display, a tooltip displays the full name.

AVX-56213

Resolved an issue where the appliance version in CoPilot incorrectly showed as 3.0.1, when it should have been 3.1.0 or 3.2.0. The correct appliance version now displays for all CoPilot instances.

AVX-53189

Corrected an issue on Monitor > Notifications > Alerts that caused XLSX format file downloads to fail.

AVX-53622

Corrected a problem with the ordering of upgrade groups on Administration > Upgrade > Upgrade Plan.

AVX-53629

An issue was corrected in which CoPilot showed a timeout error even though firewall deployment was successful.

AVX-54088

Resolved an issue where CoPilot crashed when the Edge site name was the same as the CSP region name.

AVX-54113

The filter on Security > Distributed Cloud Firewall > Monitor displayed the rule IDs instead of rule names.

AVX-54401

Resolved filtering issues on Security > Distributed Cloud Firewall > Monitor.

AVX-54508

When connecting a public cloud to an External Device with the Static Route-Based (Mapped) option selected, transit gateways would incorrectly display in the Local Gateway dropdown. Transit gateways are now removed from the dropdown since Static Route-Based (Mapped) is not supported with transit gateways.

AVX-49652

For Edge Gateways that are deployed on the Equinix platform, if a local BGP ASN is not set before underlay BGP is enabled in the CoPilot UI: Edit Edge Gateway dialog box, BGP will not be enabled on the gateway and the underlay BGP connection will not be established.

As a workaround, before you enable underlay BGP, you must first set the Edge Gateway’s BGP ASN in the gateway’s Settings tab.

Go to Cloud Fabric > Edge > Gateways tab and select the gateway.

 In the gateway’s Settings tab, expand the Border Gateway Protocol (BGP) section and set the Local AS Number.

After the Local AS Number is set, underlay BGP can be enabled on the gateway.

AVX-54076

In Topology, resolved an issue where Transit and Spoke VPCs were missing annotations.

AVX-54077

In Topology, resolved an issue where certain Virtual Private Clouds (VPCs) were missing the resource tab in the detail panel.

AVX-54698

Improved performance when opening Manage Gateway Attachment dialog for Edge Gateway.

AVX-54723

Addressed security issue CVE-2024-6387, known as "RegreSSHion".

AVX-54775

Resolved an issue where FlightCheck would report incorrect Transit Gateway traffic totals.

AVX-53629

During firewall deployment, a timeout issue might cause the task message to falsely indicate a failure, although deployment is successful. This error message can be safely ignored. To confirm the status of the firewall, go to Security > FireNet > Firewall.

AVX-54074

Unmanaged VPCs created using the Copilot UI are not displaying on Cloud Fabric > Topology.

AVX-54370

Users are unable to configure the Remote Syslog profile from Settings > Logging Services > Remote Syslog.

AVX-54401, AVX-54402, AVX-54113

AVX-53863

AVX-53452

In CostIQ, the Cost Centers and Shared Services tabs do not display the buttons to add entries. This occurs when the tables are empty and do not contain rows.

AVX-53481

In some circumstances, CoPilot might not receive NetFlow data, resulting in information not being available in FlowIQ.

AVX-52644

Aviatrix Billing is not available if Aviatrix Platform was purchased through a reseller. Contact your reseller for billing information.

AVX-53073

Table filtering did not work on table columns that contained certain data types, such as dates and status.

AVX-52420

After detaching a user, another user could not be attached to a gateway with Elastic Load Balancer enabled.

AVX-48830

In some environments, historical data was not being deleted to make room for new flow and performance results.

AVX-52469

Performance statistics for Edge devices were not being properly collected.

AVX-52496

On the Diagnostics > Cloud Routes > BGP Info tab, learned advertised routes were missing from the list of connections.

AVX- 52559

On the Cloud Fabric > Gateways > Transit Gateways > Approvals tab, you could not add approved CIDRs because the UI loaded the wrong page. The correct dialog now displays, so you can add Pre-Approved CIDRs.

AVX-38559

On Diagnostics > Cloud Routes > BGP Info, the Connection Name for the Advertised CIDR was incorrectly listing "All Connections." It now lists only the selected CIDRs.

AVX-51138

On Networking > Connectivity > AWS TGW > Attachments > VPC, after attaching a VPC, the Attach VPC button would be grayed out, not allowing for additional VPC attachments.

AVX-51422

The topology map incorrectly displayed resources as Specialty Gateway VPC/VNets rather than Unmanaged VPC/VNets.

AVX-51632

Single IP HA is not allowed for Site2Cloud workflows for spoke and transit. Attempting this configuration now results in an error message.

AVX-51799

Alert emails were not being sent from CoPilot since the last release. Alert emails now work as intended.

AVX-43180

If your Controller is using an outdated image, a software upgrade may fail. If your Controller software upgrade fails, please contact the Aviatrix Support team (https://support.aviatrix.com) for assistance.

AVX-44197

The charts showing system and network telemetry statistics for Edge devices in the CoPilot > Cloud Fabric > Edge > Devices page may show inconsistent data.

AVX-40092

When uploading a custom SSL certificate to CoPilot, a manual restart of the VM or web service was required to load the new SSL certificate.

Now, following the successful installation of a certificate and key, CoPilot performs an automatic reload on the web server and the browser page refreshes, so a manual restart is no longer needed.

AVX-45459

When editing a Site2Cloud (S2C) connection, Remote Gateway Identifier fields should show the current configuration.

AVX-48296

The Copilot default WebGroup, “Any-Web” could incorrectly read as “*.*” and throw an error when used in policies with newer Controllers. To resolve this issue, edit the contents of the “Any-Web” web group to “*” instead. After CoPilot release 4.5.0, the “Any-Web” web group is editable. As of the 4.7.0 release, the default WebGroup is named All-Web.

AVX-49979

When using Topology Builder to deploy a spoke gateway, an error displays after clicking Deploy, even though the gateway deploy succeeds. Topology Builder then becomes unusable.

AVX-50452

Webhooks referencing a sub-attribute of the variable {{metricInfo.matchingHostsWithMetrics}} would not populate the correct value.

AVX-50503

If the FireNet Transit Gateway has more than one spoke gateway attached, and some of them have Subnet Groups, the CoPilot UI will not be able to show the list of groups in the Azure Spoke Subnet Groups dialog.

AVX-50638

Enabling or disabling FireNet egress failed with the error, “Number of max connections cannot be a negative number or zero.”

AVX-51072

In Cloud Fabric > Topology, CoPilot incorrectly assigned managed GCP & Azure VPC nodes to Topology VPC nodes, causing duplication of the nodes in the Topology map.

AVX-43180

If your Controller is using an outdated image, a software upgrade may fail. If your Controller software upgrade fails, please contact the Aviatrix Support team for assistance.

AVX-44197

The charts showing system and network telemetry statistics for edge devices in the CoPilot > Cloud Fabric > Edge > Devices page may show inconsistent data.

AVX-48012

In Create Rule, ICMP with WebGroups is an incompatible selection. To reflect this, ICMP is now disabled in the Protocol Dropdown if WebGroups is selected.

AVX-49229

In Notifications > Alerts, entities table did not display properly on the timeline.

AVX-50077

The downloaded CSV file from the CoPilot Audit page contains`"[object Object]"`invalid value. On the Administration > Audit tab, the downloaded CSV file did not correctly populate the "Key-Values" column.

AVX-43180

If your Controller is using an outdated image, a software upgrade may fail. If your Controller software upgrade fails, please contact the Aviatrix Support team for assistance.

AVX-44197

The charts showing system and network telemetry statistics for edge devices in the CoPilot > Cloud Fabric > Edge > Devices page may show inconsistent data.

AVX-49282

The Distributed Cloud Firewalling table did not display the correct source and destination SmartGroups.

AVX-43180

If your Controller is using an outdated image, a software upgrade may fail. If your Controller software upgrade fails, please contact the Aviatrix Support team for assistance.

AVX-44200

The charts showing system and network telemetry statistics for Edge devices in the CoPilot > Cloud Fabric > Edge > Devices page may show inconsistent data.

AVX-46824

AVX-49376

(Azure) The CoPilot Backup/Restore feature is only supported for Controller software version 7.0.1307 or above.

AVX-49282

The Distributed Cloud Firewalling table did not display the correct source and destination SmartGroups.

AVX-48245

CoPilot failed to delete VPN gateways correctly.

AVX-44197

Charts showing telemetry statistics for edge devices

The charts showing system and network telemetry statistics for edge devices in the CoPilot > Cloud Fabric > Edge > Devices page may show inconsistent data.

AVX-48881

Spoke Gateways with Egress FQDN enabled are not displayed in the Spoke Gateway tab.

AVX-48995

The CostIQ Trend chart in CoPilot displayed as empty even when there was cost data available.

AVX-44197

Charts showing telemetry statistics for edge devices

The charts showing system and network telemetry statistics for edge devices in the CoPilot > Cloud Fabric > Edge > Devices page may show inconsistent data.

AVX-48849

The CoPilot AppIQ report could not be generated without an error: “e.palette.copilot is undefined.”

AVX-48865

A DFW (Distributed Cloud Firewall) table could show an incorrect or missing destination SmartGroup.

AVX-44197

Charts showing telemetry statistics for edge devices

The charts showing system and network telemetry statistics for edge devices in the CoPilot > Cloud Fabric > Edge > Devices page may show inconsistent data.

AVX-46775

The Inventory Report page had a filtering error that caused data to display incorrectly.

AVX-46824

Incorrect Status for External Connections Shown on Dashboard

The CoPilot > Dashboard > Connection Health card would sometimes show incorrect status for external connections (Site2Cloud connections). If this was encountered, you could use the following CoPilot pages to check the status of your external connections:

CoPilot > Diagnostics > Cloud Routes > External Connections CoPilot > Networking > Connectivity > External Connections (S2C)

AVX-47887

Diagnostic Tools via Topology Page not Working

When performing diagnostic functions, such as packet capture, on a gateway via the CoPilot > Cloud Fabric > Topology map, the diagnostic tool would sometimes show no data. If this was encountered, you could use the following CoPilot page to perform diagnostic functions on a gateway:

CoPilot > Diagnostics > Diagnostics Tools > Gateway Diagnostics > select the gateway instance

AVX-44197

Charts showing telemetry statistics for edge devices

The charts showing system and network telemetry statistics for edge devices in the CoPilot > Cloud Fabric > Edge > Devices page may show inconsistent data.

AVX-46824

Incorrect Status for External Connections Shown on Dashboard

The CoPilot > Dashboard > Connection Health card will sometimes show incorrect status for external connections (Site2Cloud connections). If this is encountered, please use the following CoPilot pages to check the status of your external connections:

CoPilot > Diagnostics > Cloud Routes > External Connections

CoPilot > Networking > Connectivity > External Connections (S2C)

AVX-47887

Diagnostic Tools via Topology Page not Working

When performing diagnostic functions, such as packet capture, on a gateway via the CoPilot > Cloud Fabric > Topology map, the diagnostic tool will sometimes show no data. If this is encountered, please use the following CoPilot page to perform diagnostic functions on a gateway:

CoPilot > Diagnostics > Diagnostics Tools > Gateway Diagnostics > select the gateway instance

RateLimitExceeded error in UI or Terraform

The error RequestLimitExceeded is shown in UI/Terraform.

This generally means the Controller received more requests from the client than it can process.

As a workaround, try upgrading the VM of the Controller to a larger size.

AVX-44197

Charts showing telemetry statistics for edge devices

The charts showing system and network telemetry statistics for edge devices in the CoPilot > Cloud Fabric > Edge > Devices page may show inconsistent data.

AVX-46113

When deploying a high-availability/secondary Edge Gateway, the Controller security group was not being updated with the Edge management egress CIDR.

AVX-47887

Diagnostic Tools via Topology Page not Working

When performing diagnostic functions, such as packet capture, on a gateway via the CoPilot > Cloud Fabric > Topology map, the diagnostic tool will sometimes show no data. If this is encountered, please use the following CoPilot page to perform diagnostic functions on a gateway:

CoPilot > Diagnostics > Diagnostics Tools > Gateway Diagnostics > select the gateway instance

AVX-46824

Incorrect Status for External Connections Shown on Dashboard

The CoPilot > Dashboard > Connection Health card will sometimes show incorrect status for external connections (Site2Cloud connections). If this is encountered, please use the following CoPilot pages to check the status of your external connections:

CoPilot > Diagnostics > Cloud Routes > External Connections

CoPilot > Networking > Connectivity > External Connections (S2C)

RateLimitExceeded error in UI or Terraform

The error RequestLimitExceeded is shown in UI/Terraform.

This generally means the Controller received more requests from the client than it can process.

As a workaround, try upgrading the VM of the Controller to a larger size.

AVX-44197

Charts showing telemetry statistics for edge devices

The charts showing system and network telemetry statistics for edge devices in the CoPilot > Cloud Fabric > Edge > Devices page may show inconsistent data.

AVX-44713

Packet capture not showing results if tunnel interface is selected

The Packet Capture diagnostic tool in CoPilot did not show packets when a tunnel interface was selected and the duration was 10 seconds.

Higher CPU usage observed in System Health page

You may notice a higher CPU usage in the CPU Used chart of the CoPilot > Settings > Resources > System Health page.

This is expected due to a change in calculating used CPU and idle CPU.

RateLimitExceeded error in UI or Terraform

The error RequestLimitExceeded is shown in UI/Terraform.

This generally means the Controller received more requests from the client than it can process.

As a workaround, try upgrading the VM of the Controller to a larger size.

AVX-44197

Charts showing telemetry statistics for edge devices

The charts showing system and network telemetry statistics for edge devices in the CoPilot > Cloud Fabric > Edge > Devices page may show inconsistent data.

AVX-44222

The CoPilot > Cloud Resources > Cloud Assets > VPC/VNets & Subnets page was not showing data and displayed the error "Something went wrong."

AVX-44713

Packet capture not showing results if tunnel interface is selected

The Packet Capture diagnostic tool in CoPilot does not show packets when a tunnel interface is selected and the duration is 10 seconds.

RateLimitExceeded error in UI or Terraform

The error RequestLimitExceeded is shown in UI/Terraform.

This generally means the Controller received more requests from the client than it can process.

As a workaround, try upgrading the VM of the Controller to a larger size.

AVX-44197

Charts showing telemetry statistics for edge devices

The charts showing system and network telemetry statistics for edge devices in the CoPilot > Cloud Fabric > Edge > Devices page may show inconsistent data.

Single sign-on (SSO) stops working for logging directly into CoPilot

If users could previously log into CoPilot via SAML and then can no longer do so, this may be related to a known issue.

As a workaround, users can log into Controller via SAML and then launch CoPilot from the Controller UI by clicking the Apps icon and selecting 'CoPilot'.

AVX-44713

Packet capture not showing results if tunnel interface is selected

The Packet Capture diagnostic tool in CoPilot does not show packets when a tunnel interface is selected and the duration is 10 seconds.

RateLimitExceeded error in UI or Terraform

The error RequestLimitExceeded is shown in UI/Terraform.

This generally means the Controller received more requests from the client than it can process.

As a workaround, try upgrading the VM of the Controller to a larger size.

AVX-44197

Charts showing telemetry statistics for edge devices

The charts showing system and network telemetry statistics for edge devices in the CoPilot > Cloud Fabric > Edge > Devices page may show inconsistent data.

AVX-44223

Some FlowIQ charts showed no data.

AVX-44713

Packet capture not showing results if tunnel interface is selected

The Packet Capture diagnostic tool in CoPilot does not show packets when a tunnel interface is selected and the duration is 10 seconds.

RateLimitExceeded error in UI or Terraform

The error RequestLimitExceeded is shown in UI/Terraform.

This generally means the Controller received more requests from the client than it can process.

As a workaround, try upgrading the VM of the Controller to a larger size.

AVX-44197

Charts showing telemetry statistics for edge devices

The charts showing system and network telemetry statistics for edge devices in the CoPilot > Cloud Fabric > Edge > Devices page may show inconsistent data.

Aviatrix OpenVPN® feature configuration

The configuration of Aviatrix OpenVPN features cannot be done via the CoPilot user interface at this time.

AVX-44796

When trying to create a FireNet transit in Azure and GCP, the gateways were created but the FireNet function failed.

AVX-44365

CoPilot UI was flickering when detecting certain license types.

AVX-44223

Some FlowIQ charts showed no data.

AVX-44186

On the CoPilot > FlowIQ > Network > Trends page, the Source IP and Destination IP charts were displaying data incorrectly on the horizontal axis.

AVX-44713

Packet capture not showing results if tunnel interface is selected

The Packet Capture diagnostic tool in CoPilot does not show packets when a tunnel interface is selected and the duration is 10 seconds.

RateLimitExceeded error in UI or Terraform

The error RequestLimitExceeded is shown in UI/Terraform.

This generally means the Controller received more requests from the client than it can process.

As a workaround, try upgrading the VM of the Controller to a larger size.

AVX-44197

Charts showing telemetry statistics for edge devices

The charts showing system and network telemetry statistics for edge devices in the CoPilot > Cloud Fabric > Edge > Devices page may show inconsistent data.

Aviatrix OpenVPN® feature configuration

The configuration of Aviatrix OpenVPN features cannot be done via the CoPilot user interface at this time.

Some blank FlowIQ charts

Some customers were seeing some blank FlowIQ charts in the 4.0.0 release.

AVX-44713

Packet capture not showing results if tunnel interface is selected

The Packet Capture diagnostic tool in CoPilot does not show packets when a tunnel interface is selected and the duration is 10 seconds.

RateLimitExceeded error in UI or Terraform

The error RequestLimitExceeded is shown in UI/Terraform.

This generally means the Controller received more requests from the client than it can process.

As a workaround, try upgrading the VM of the Controller to a larger size.

AVX-44197

Charts showing telemetry statistics for edge devices

The charts showing system and network telemetry statistics for edge devices in the CoPilot > Cloud Fabric > Edge > Devices page may show inconsistent data.

Issue after upgrading Controller and switching licenses

After you upgraded Controller and switched licenses, you had to refresh the license information in CoPilot > Settings > Licensing by clicking the refresh icon of the CoPilot application (not the browser refresh button).

RateLimitExceeded error in UI or Terraform

The error RequestLimitExceeded is shown in UI/Terraform.

This generally means the Controller received more requests from the client than it can process.

As a workaround, try upgrading the VM of the Controller to a larger size.

Charts showing telemetry statistics for edge devices

The charts showing system and network telemetry statistics for edge devices in the CoPilot > Cloud Fabric > Edge > Devices page may show inconsistent data.

AVX-42120

Alerts with multiple email recipients were not sent.

Incorrect title and unit for FlightPath graph

An issue with graphs in the Flightpath report has been corrected.

Issue after upgrading Controller and switching licenses

After you upgrade Controller and switch licenses, you must refresh the license information in CoPilot > Settings > Licensing by clicking the refresh icon of the CoPilot application (not the browser refresh button).

RateLimitExceeded error in UI or Terraform

The error RequestLimitExceeded is shown in UI/Terraform.

This generally means the Controller received more requests from the client than it can process.

As a workaround, try upgrading the VM of the Controller to a larger size.

Unable to migrate to new CoPilot image

Migrating from one CoPilot image to another CoPilot image using backup and restore is not available at this time.

Issue after upgrading Controller and switching licenses

After you upgrade Controller and switch licenses, you must refresh the license information in CoPilot > Settings > Licensing by clicking the refresh icon of the CoPilot application (not the browser refresh button).

RateLimitExceeded error in UI or Terraform

The error RequestLimitExceeded is shown in UI/Terraform.

This generally means the Controller received more requests from the client than it can process.

As a workaround, try upgrading the VM of the Controller to a larger size.

Issue after upgrading Controller and switching licenses

After you upgrade Controller and switch licenses, you may need to do the following:

1. Refresh the license information in CoPilot > Settings > Licensing by clicking the refresh icon of the CoPilot application (not the browser refresh button).

2. Log out and log in to CoPilot.

RateLimitExceeded error in UI or Terraform

The error RequestLimitExceeded is shown in UI/Terraform.

This generally means the Controller received more requests from the client than it can process.

As a workaround, try upgrading the VM of the Controller to a larger size.

AVX-40131

Anomaly detail graphs were incorrectly shown as being empty.

AVX-39841

When the CSP Resource Polling feature was disabled, an error notification appeared in unrelated features like Topology.

AVX-41384

SKU features cannot be enabled in CoPilot via CoPilot > Settings > Licensing > Add-on New Features.

This problem may occur if the CoPilot’s associated Controller was deployed using a flex license (Aviatrix Secure Networking Platform 2208 Universal License).

If you experience this issue, in Controller > License, click on the Show (eye) icon in the customer ID text box, and then click SAVE. In CoPilot, retry the SKU feature enablement.

RateLimitExceeded error in UI or Terraform

The error RequestLimitExceeded is shown in UI/Terraform.

This generally means the Controller received more requests from the client than it can process.

As a workaround, try upgrading the VM of the Controller to a larger size.

Billing Data Incorrect

When using the CoPilot > Billing & Cost page to analyze costs of Aviatrix resources, incorrect data was shown in some cases.

RateLimitExceeded error in UI or Terraform

The error RequestLimitExceeded is shown in UI/Terraform.

This generally means the Controller received more requests from CoPilot than it can process.

As a workaround, try upgrading the VM of the Controller to a larger size.

Egress Gateways were not showing in Egress > Monitor tab > VPC/VNet list

When using the CoPilot > Security > Egress > Monitor tab to filter VPC/VNets, Egress Gateways (Specialty Gateway with Egress function) were not included in the search results. Egress Gateways (Specialty gateways) are now included in the results for search in the Monitor tab.

If you have Egress Gateways (Specialty gateways), they are included in the results of the Overview tab (but not Monitor tab).

RateLimitExceeded error in UI or Terraform

The error RequestLimitExceeded is shown in UI/Terraform.

This generally means the Controller received more requests from CoPilot than it can process.

As a workaround, try upgrading the VM of the Controller to a larger size.

AVX-40341

Attempts to upload a CA certificate would fail in CoPilot > Settings > Configuration > Certificate Management.

RateLimitExceeded error in UI or Terraform

The error RequestLimitExceeded is shown in UI/Terraform.

This generally means the Controller received more requests from CoPilot than it can process.

As a workaround, try upgrading the VM of the Controller to a larger size.

Egress Gateways not showing in Egress > Monitor tab > VPC/VNet list

When using the CoPilot > Security > Egress > Monitor tab to filter VPC/VNets, Egress Gateways (Specialty Gateway with Egress function) are not included in the search results.

If you have Egress Gateways (Specialty gateways), they are included in the results of the Overview tab (but not Monitor tab).

AVX-40271

In a new deployment of CoPilot, some services were not starting.

AVX-40264

The CoPilot > Security > ThreatIQ > Configuration page was not showing data and displayed the error "Something went wrong. Please contact support."

AVX-40170

In some cases CoPilot was prompting for a customer ID when it was unnecessary.

AVX-40166

In a new deployment of CoPilot, the default global health alerts (Global Control Plane Health and Global Network Health) were not created.

RateLimitExceeded error in UI or Terraform

The error RequestLimitExceeded is shown in UI/Terraform.

This generally means the Controller received more requests from CoPilot than it can process.

As a workaround, try upgrading the VM of the Controller to a larger size.

Cannot upload CA certificate

Attempts to upload a CA certificate will fail in CoPilot > Settings > Configuration > Certificate Management.

Issue

Description

AVX-39763

CoPilot triggered false Gateway Status alerts when a gateway(s) was launched if an alert configuration based on gateway status existed.

AVX-36371

After upgrading Controller to some Controller versions where a correction of the memory_free metric definition had been made, CoPilot triggered false Memory Free alerts.

RateLimitExceeded error in UI or Terraform

The error RequestLimitExceeded is shown in UI/Terraform.

This generally means the Controller received more requests from CoPilot than it can process.

As a workaround, try upgrading the VM of the Controller to a larger size.

Cannot upload CA certificate

Attempts to upload a CA certificate will fail in CoPilot > Settings > Configuration > Certificate Management.

Issue

Description

AVX-37816

The error code is not included in the error message displayed on the CoPilot login page.

RateLimitExceeded error in UI or Terraform

The error RequestLimitExceeded is shown in UI/Terraform.

This generally means the Controller received more requests from CoPilot than it can process.

As a workaround, try upgrading the VM of the Controller to a larger size.

AVX-38581

When configuring memory or disk-related alerts via CoPilot > Monitor > Notifications > Alerts page, it is possible that the alerts may not be triggered correctly.

AVX-38618

The CoPilot > Monitor > Performance page shows a " No gateways found" error.

AVX-38619

The CoPilot > Monitor > Notifications > Alerts Configuration page shows an "Internal database error".

RateLimitExceeded error in UI or Terraform

The error RequestLimitExceeded is shown in UI/Terraform.

This generally means the Controller received more requests from CoPilot than it can process.

As a workaround, try upgrading the VM of the Controller to a larger size.

Issue

Description

AVX-37956

The CoPilot > Security > Egress > Monitor page only allows the selection of the actively enabled VPC for egress monitoring.

AVX-38361

The CoPilot > Monitor > Performance page cannot list the gateway interfaces and shows errors.

AVX-38126

The CoPilot > Monitor > Traffic & Latencies > Latencies page shows an "Internal database error".

Egress page

The monitoring aspects of the egress page in CoPilot > Security > Egress that had become unavailable in 3.7.1 is restored. The page works as before but you must now specify the VPC you want to view egress results for as a first step.

RateLimitExceeded error in UI or Terraform

The error RequestLimitExceeded is shown in UI/Terraform.

This generally means the Controller received more requests from CoPilot than it can process.

As a workaround, try upgrading the VM of the Controller to a larger size.

Issue

Description

AVX-38109

Cannot log into CoPilot if using Controller version 6.9 or earlier.

AVX-38018

The CoPilot > Settings > Task page freezes after closing the details pane for a task.

AVX-37920

The CoPilot > Billing & Cost > CostIQ > Shared Services page shows an error in the details pane.

Known Issue

After an upgrade to CoPilot 3.7.1 or later, the ability to view live logs for Egress traffic, and to display and download these logs, is removed. This known issue was caused by a redesign of the Security > Egress page. The redesign currently requires that Egress traffic rules be configured in CoPilot.

The monitoring aspects of the Egress page currently do not work for egress-traffic rules that were originally created in the Aviatrix Controller.

You can now configure Egress rules in CoPilot or in Controller, not both.

If you want to use Egress in CoPilot and you already have Egress set up in the Controller, you must remove FQDN tags from the latter. Please contact your Aviatrix representative for more information.

Issue

Description

AVX-36906

When ThreatIQ blocking was enabled, a large number of firewall rules instantiated on a gateway could cause the gateway to go down.

CoPilot now considers the number of firewall rules supported per gateway when ThreatIQ threats are detected. If the supported number is exceeded or about to be exceeded, CoPilot will show an alert on the CoPilot > Security > ThreatIQ overview and configuration pages.

When the supported number is exceeded, CoPilot will not block new threat IPs on the gateway. Threats from existing IPs programmed on the gateway will continue to be blocked.

AVX-36975

Using the search or live function in the CoPilot > Security > Egress Control page resulted in an error message.

Known Issue

After an upgrade to CoPilot 3.7.1, the ability to view live logs for Egress traffic, and to display and download these logs, is removed. This known issue was caused by a redesign of the Security > Egress page. The redesign currently requires that Egress traffic rules be configured in CoPilot.

The monitoring aspects of the Egress page currently do not work for egress-traffic rules that were originally created in the Aviatrix Controller.

You can now configure Egress rules in CoPilot or in Controller, not both.

If you want to use Egress in CoPilot and you already have Egress set up in the Controller, you must remove FQDN tags from the latter. Please contact your Aviatrix representative for more information.

Issue

Description

AVX-32666

Disabling ThreatIQ blocking does not complete.

AVX-36013

The ability to change the frequency of a task in CoPilot > Settings > Task was not working as expected.

AVX-36571

The Latency Monitor page in CoPilot > Monitor > Traffic & Latencies was taking a long time to open.

AVX-36599

The Traffic page in CoPilot > Monitor > Traffic & Latencies was showing duplicate regions.

AVX-36622

The VPC/VNet Routes page in CoPilot > Troubleshoot > Cloud Routes was not showing routes information.

Issue

Description

AVX-34093, AVX-30550

The ability to switch from CoPilot to Controller UI from the CoPilot home page was not working.

AVX-33983, AVX-30771

The CoPilot UI was not showing the tracelog file name for an Edge CSP gateway after uploading it to S3.

AVX-33600

The Cloud Routes page (CoPilot > Troubleshoot > Cloud Routes > Gateway Route) was not showing expected routes information.

AVX-34370

The dashboard was showing an inaccurate number of instances in large environments.

AVX-35529

Gateway routes data collection was failing in large environments.

AVX-35445

Latency data collection was failing in large environments.

AVX-35137

When some nodes plotted on the Topology map were clicked on or expanded, the map would fail with the error Cannot read properties of null (reading 'getLayer').

AVX-35354

In Cloud Routes > Gateway Routes, a gateway route was sometimes shown as down when its status was unknown. If a gateway status is unknown, CoPilot now shows '-' in the status column.

Bug fix

A fix is delivered for a disk full issue that was causing a file to be corrupted.

If you cannot log in to your CoPilot and you see a "Malformed JSON" error, please contact Aviatrix Support. Do not attempt to reboot the CoPilot instance.

AVX-34935

When trying to create an Edge Gateway, CoPilot would throw the error "flows[version] is not a function".

AVX-33983, AVX-30771

CoPilot was not showing the name of the Tracelog file when uploading tracelog for diagnostics.

AVX-33204, AVX-33027

After restoring Controller after a backup and restore, a login to CoPilot would fail with the error "Authentication Failed: Converting circular structure to JSON".

AVX-30379

After a Controller HA backup, a login to CoPilot would fail due to CoPilot pointing to an old Controller IP.

AVX-33592

Gateways page was not displaying as expected.

AVX-33594

A simple deployment of CoPilot when launched from the Controller would not function.

AVX-33314

Terraform scripts created from the Topology Builder were not generated as expected.

AVX-33434

Site-to-cloud (S2C) latency was not appearing in the Intelligent Cloud Analytics dashboard.

AVX-32646

CoPilot alert configurations that used the CPU Idle system metric were not being triggered correctly and not resolving as expected.

AVX-28051

App domains (for micro-segmentation) that included an IP address could not be created (saved).

n/a

The Aviatrix Billing page showed the error message Unable to retrieve YTD costs or Unable to retrieve billing plan.

n/a

The logical view of the network segmentation chart showed broken lines.

Bug fix

Minor bug fix for micro-segmentation.

Known issue

Known Issue for Aviatrix Billing

You cannot retrieve cost data on the Aviatrix Billing page and get the error message Unable to retrieve YTD costs or Unable to retrieve billing plan.

Workaround: Change your CoPilot service account to be your default admin account (username “admin” is expected).

Known Issue

Known Issue for Logical View Chart

The logical view of the network segmentation chart shows broken lines.

AVX-28051

Known Issue for App Domains (Micro-Segmentation)

You cannot create a micro-segmentation application domain with IP addresses. If a CIDR is included in the App Domain, it cannot be saved.