Prerequisites for Edge Spoke Gateway Deployment on Equinix Network Edge

The following are the prerequisites to deploy an Aviatrix Edge Spoke Gateway on Equinix Network Edge.

1. Obtain an Equinix Fabric Account

If you do not already have an Equinix Fabric account, contact your Equinix representative or visit their website to create an account.

2. Set Up the Network Service Provider Platform Account

To deploy Aviatrix Edge Gateways on Equinix Network Edge, you will need to first set up a Network Service Provider platform account in CoPilot. To set up the platform account, see Setting up Accounts for Edge Platforms .

3. Provide Network Access

Aviatrix Edge Gateway requires outbound access to communicate with the Aviatrix Controller, Aviatrix CoPilot, and other Aviatrix Gateways. You must allow access on the specified ports on your firewall. For all Edge Gateway outbound access requirements, see Aviatrix Products: Required Access for External Sites on the Aviatrix Customer Support website.

4. Obtain Edge Gateway Interface IP Configurations

The Edge Spoke Gateway on the Equinix platform supports one LAN, one MGMT, and up to eight WAN interfaces. For each WAN interface that you want to configure, you will need to provide the following information during Edge Gateway creation for the primary and secondary HA Edge Gateways.

WAN Interface	Description
Interface Primary CIDR	The CIDR for the WAN interface. DHCP for dynamic IP address assignment is not supported. Interface CIDR must be in the format interface_ip/netmask (for example, 192.18.20.1/24). Interface CIDR cannot be link-local CIDR. If you need to create a BGP underlay connection to cloud service provider (CSP) with a link-local IP address, you must enter the link-local IP address in the Link-local Underlay CIDR setting of the WAN interface.
Default Gateway IP	The Default Gateway IP address for the WAN interface. For CSP underlay, this is the remote side IP address of the BGP session on CSP VNG or VGW. If Link-Local Underlay CIDR is configured, the Default Gateway IP should be in the same subnet as the Link-Local Underlay CIDR, otherwise, it should be in the same subnet as the WAN Interface CIDR.
Public IP	The public IP for the WAN interface. The public IP of the WAN interface is used for peering connections over the public network.

If you need to set up BGP underlay connection to cloud service provider (CSP), you will need to provide the following information.

BGP Configuration	Description
Link-Local Underlay CIDR (GCP only)	The Link-Local Underlay CIDR is used for BGP underlay connections to cloud service provider (CSP). If you need to create a BGP underlay connection to CSP with a link-local IP address, you must provide the Link-Local Underlay CIDR for the WAN interface in the format of link_local_underlay_ip/netmask (for example 169.254.100.3/24). This is required for GCP. If terminating GCP Interconnect and using BGP underlay on Edge, provide the WAN Default Gateway of the peer IP address. If Link-Local Underlay CIDR is configured, the Default Gateway IP should be in the same subnet as the Link-Local Underlay CIDR, otherwise, it should be in the same subnet as the WAN Interface CIDR.
Remote ASN	The AS Number of the CSP side peering connection such as private VIF on VGW (AWS) and VNG ASN (Azure).
Remote LAN IP	The IP address of the CSP VNG or VGW peering PTP IP. (GCP is not supported).

LAN Interface	Description
Interface CIDR	The CIDR for the LAN interface. DHCP for dynamic IP address assignment is not supported.
IPv6 CIDR	The IPv6 CIDR for the LAN interface. DHCP for dynamic IP address assignment is not supported.
Default Gateway IP	(Optional) The Default Gateway IP address for the LAN interface.
Default Gateway IPv6	(Optional) The Default Gateway IPv6 address for the LAN interface.

For Controller 9.0 and later on Equinix, enable Support for IPv6 on LAN 0 in Step 2: Interface Configuration, and enter Interface IPv6 CIDR and Default Gateway IPv6 when you deploy IPv6 on the Edge Spoke Gateway.

MGMT Interface	Desciption
Management Interface IP	The Management IP address (in the format of management_ip_address/netmask). Not required for DHCP.
Management Default Gateway	The Default Gateway IP address for the Management interface. Not required for DHCP.
Management Egress IP	The Management Egress IP address to be allowed in the Controller Security Group.
Primary DNS Server	The Primary DNS server IP address for the Management interface. Not required for DHCP.
Secondary DNS Server	(Optional) The Secondary DNS server IP address for the Management interface. Not required for DHCP.

Concepts & Architecture

Guides

Reference

Prerequisites for Edge Spoke Gateway Deployment on Equinix Network Edge

1. Obtain an Equinix Fabric Account

2. Set Up the Network Service Provider Platform Account

3. Provide Network Access

4. Obtain Edge Gateway Interface IP Configurations

​1. Obtain an Equinix Fabric Account

​2. Set Up the Network Service Provider Platform Account

​3. Provide Network Access

​4. Obtain Edge Gateway Interface IP Configurations

1. Obtain an Equinix Fabric Account

2. Set Up the Network Service Provider Platform Account

3. Provide Network Access

4. Obtain Edge Gateway Interface IP Configurations