> ## Documentation Index
> Fetch the complete documentation index at: https://docs.aviatrix.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Create a Topology View

In the Topology Network View, you can configure and save filters as retrievable
Views. Views allow you to see your network from multiple perspectives without
having to create new filters each time you go into Topology.

For example, you could select filters to just see your Azure resources from a
specific region that are configured for high availability, and then save that
filtered Topology map as a View.

For descriptions of the filter options available in Topology, see
[Topology Filters Pane](/docs/cloud/monitoring/topology-working-with#filters-pane).

To create a Topology View, do the following:

1. Go to *Cloud Fabric > Topology > Overview*.

2. Click the *Filters* tab on the right to go into filter view.

3. You can use the Search to filter the Topology map by name, ID, type, etc.
   using letters, numbers, or characters.
   <Tip>
     The Topology map is filtered each time you press Enter. You can keep adding
     characters in the Search field and pressing Enter to get the result you
     want.
   </Tip>

4. You can configure the following filter criteria:
   * Resources
   * Cloud Regions/Sites
   * Types
   * SmartGroups

5. You can also filter by condition:
   1. Click *All* (matches all conditions) or *Any* (matches any condition) and
      then select *+ Condition*.

   2. Click in the left selection field and select from Properties or Cloud Tags
      in the list that displays. For information about the properties you can
      filter on, see
      [Topology Property Reference](/docs/cloud/monitoring/topology-property-reference).

   3. Click in the right selection field and select a qualifier. The most common
      qualifiers are *contains, does not contain, equals, does not equal, starts
      with, does not start with, ends with, does not end with*.

   4. Enter or select a value in the third field. When you select certain
      qualifiers, you choose a corresponding value or values from another
      drop-down list. For other qualifiers, you enter text.

      <img src="https://mintcdn.com/aviatrix-14b37c43/Edj7hoOEnFtUHgGn/docs/cloud/images/topology-condition-equals.png?fit=max&auto=format&n=Edj7hoOEnFtUHgGn&q=85&s=5900c68514446afbf7d4da872b0400b1" alt="screenshot of condition fields" width="413" height="175" data-path="docs/cloud/images/topology-condition-equals.png" />

      Depending on the property selected, different types of values can be
      selected.

      <Tip>
        If the operator requires text input, you must press Enter to generate
        the map output.
      </Tip>

   5. Continue adding conditions as needed. You can add up to ten filter
      conditions.

6. To save the selected filters as a reusable View:

   1. Click *Save View* at the top of the right pane.
   2. In the Save View dialog, enter a name for the view and click *Save*.

   The topology view is created and stored. You can load the saved view as
   needed.

7. To remove all filter selections, click Reset Filters.

   <Note>This action immediately clears all filter options you selected.</Note>

## Modify a Topology View

If you have already created and saved a View, you can modify the filters for
that view.

To modify an existing Topology View, do the following.

1. Go to *Cloud Fabric > Topology > Overview*.
2. Click the *Filters* tab on the right to go into filter view.
3. Select a View from the drop-down list under Views.
4. Click the caret ^ next to the *Save* button and select *Save as New View*.
5. You can revert your changes by selecting *Discard Changes*.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.